LOCTITE Prism™ 454 Instant Adhesive Gel (20 g Tube, Clear) 1/ Pack
Perform clean, non-drip bonding on vertical and overhead surfaces with LOCTITE Prism™ 454 Instant Adhesive Gel. Packaged in a convenient 20 g tube, this high-viscosity, clear ethyl cyanoacrylate gel is engineered for difficult-to-bond materials requiring gap filling up to 0.010 in (0.25 mm). Formulated with surface-insensitive properties, it instantly joins porous and absorbent substrates—such as wood, paper, leather, and fabric—as well as metals, rubbers, and plastics without slumping or running.
Product Overview: Achieve precise, overhead bonding and gap-filling performance with industrial-grade LOCTITE Prism™ 454 Instant Adhesive Gel. Supplied in a controlled 20 g tube, this universal clear cyanoacrylate gel features a no-drip, thixotropic formula that stays where applied. Designed for challenging shop and field applications, its surface-insensitive chemistry ensures fast fixture speeds and maximum bond strength on rough, porous, or acidic surfaces that cause standard liquid instant adhesives to absorb or run off.
No-Drip Gel Formula: Thixotropic high-viscosity gel consistency prevents running, sagging, or dripping on vertical, slanted, or overhead workpieces.
Gap-Filling Capability: Fills voids up to 0.010 inches (0.25 mm) between loose-fitting or mismatched parts while maintaining high tensile and shear strength.
Surface-Insensitive Performance: Bonds rapidly to porous and absorbent materials like wood, paper, leather, cardstock, and cork, as well as acidic or unconditioned substrates.
Universal Material Compatibility: Creates high-strength bonds across a wide variety of similar and dissimilar materials, including metals, plastics, elastomeric rubbers, and ceramics.
Rapid Fixture Speed: Reaches fixture strength in 5 to 30 seconds depending on the substrate and gap size, minimizing holding time and speeding up assembly.
Controlled Tube Applicator: Packaged in an easy-squeeze 20 g tube that allows operators to apply precise beads or dots with minimal mess and product waste.
Recommended Applications: Vertical and overhead mounting of decorative trim, nameplates, and wire clips; bonding porous substrates such as wood, leather, fabric, and paperboard; filling gaps and joining irregular or rough metal, plastic, and rubber components; quick maintenance, field repairs, and prototype fabrication requiring immediate hold.